Investigation of pulping and paper making potential of weeds

Investigation of pulping and paper making potential of weeds

Blog Article

Increasing use of wood products accompanying with resource constraint has revealed the importance of nonwood based material.In this study, pulping and papermaking potential of three varieties of weeds including Xanthium spinosum, Carthamus tinctorius and Cyperus papyrus have been considered.At first, chemical components of the samples i.e.

cellulose, lignin and extractives have been measured following TAPPI standard test methods.Afterwards, pulping process based as bostik roll-cote soda and Kraft has been carried out and the pulp properties i.e.screen yield and reject, kappa number, caliper, bust index, tear index, brightness have been considered.

According to the results, the amount cellulose, lignin and extractives have been measured for the Xanthium spinosum %38.15, %13.5 and 4.72, respectively.

Theses parameters have been estimated about %38.25, %10.3 and % 2.95 for Carthamus tinctorius and %38.

8, %19.2 and 4.4 in case of papyrus.The yield of soda and Kraft pulp of the papyrus was more than Xanthium spinosum and Carthamus tinctorius.

Among all treatments, the highest screen yield related to soda pulping of Cyperus papyrus by %39.8 which has been obtained by 175 centigrade as a maximum temperature, L/W: 6/1, active alkaline: %30 and 90 minutes as the time at temperature.The lowest and highest amounts of the tear index were related to soda pulp sample of the Carthamus tinctorius and Kraft pulp sample of Xanthium spinosum by 2.49 and 8.

1, respectively.In addition, the lowest and highest amounts of the bursting index were related to soda pulp sample of the Cyperus papyrus and Kraft pulp sample of Xanthium spinosum by 0.61and 2.48, respectively.

Meanwhile, soda quest fryer pulp sample of the Cyperus papyrus showed the highest amount of brightness with %45 ISO.